Sistema de Gestão de Rede

Solicito apoio técnico para verificação de alarme no ACCID Dados (Circuito): "N/A" com a falha de "Tipo de Falha: Link Down". O circuito começa em (Roteador A (Origem): RNAGSPO-SPCM01-02-100GE0/10/1. Status: UP, Fabricante: HUAWEI, Alarme Ativo: QUEDA ABRUPTA DE TRAFEGO ENTRANTE) indo ate (Roteador B (Destino): RNDISPO-SPO02-01-100GE0/7/0. Status: UP, Fabricante: CISCO, Alarme Ativo: QUEDA ABRUPTA DE TRAFEGO ENTRANTE). Onde a rota física passa por (ROTA FÍSICA (ELEMENTOS TX UTILIZADOS)): Não informada Informações Extras / Rascunho: Queda abrupta de trafego entrante RNAGSPO-SPCM01-02 29/01/26 14:05:18 100GE0/10/1 CONEXAO AO CORE|RNDISPO-SPO02-01|100GE0/7/0|NONE|NONE|ACT|NONE <RNDISPO-SPO02-01>display interface 100GE0/7/0 100GE0/7/0 current state : UP (ifindex: 28) Line protocol current state : UP Link quality grade : GOOD Description: CONEXAO AO CORE|RNAGSPO-SPCM01-02|100GE0/10/1|NONE|NONE|ACT|NONE Route Port,The Maximum Transmit Unit is 9000 IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 2087-ec5a-bf5e Factor/Module: QSFP28, Standard: Reserved, FecMode: Standard The Vendor PN is OM9558ZS100 The Vendor Name is HISILICON Port BW: 100G, Transceiver max BW: 100G, Transceiver Mode: SingleMode Connector Type: LC, Transmission Distance: 80km WaveLength: 1295.56nm 1300.05nm 1304.58nm 1309.14nm Rx Warning range: [-27.958, -3.500]dBm, Tx Warning range: [-1.000, 6.499]dBm Rx0 Power: -13.08dBm, Tx0 Power: 3.83dBm Rx1 Power: -12.03dBm, Tx1 Power: 3.35dBm Rx2 Power: -12.38dBm, Tx2 Power: 3.28dBm Rx3 Power: -13.37dBm, Tx3 Power: 3.76dBm <RNAGSPO-SPCM01-02>display interface 100GE0/10/1 100GE0/10/1 current state : UP (ifindex: 149) Line protocol current state : UP Link quality grade : GOOD Description: CONEXAO AO CORE|RNDISPO-SPO02-01|100GE0/7/0|NONE|NONE|ACT|NONE Route Port,The Maximum Transmit Unit is 9000 IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is f4a4-d60b-37d0 Factor/Module: QSFP28, Standard: Reserved, FecMode: Standard The Vendor PN is OM9558ZS100 The Vendor Name is HISILICON Port BW: 100G, Transceiver max BW: 100G, Transceiver Mode: SingleMode Connector Type: LC, Transmission Distance: 80km WaveLength: 1295.56nm 1300.05nm 1304.58nm 1309.14nm Rx Warning range: [-27.958, -3.500]dBm, Tx Warning range: [-1.000, 6.499]dBm Rx0 Power: -16.47dBm, Tx0 Power: 3.27dBm Rx1 Power: -17.21dBm, Tx1 Power: 4.03dBm Rx2 Power: -16.57dBm, Tx2 Power: 3.68dBm Rx3 Power: -16.43dBm, Tx3 Power: 3.30dBm Loopback: none, LAN full-duplex mode, Pause Flowcontrol: Receive Enable and Send Enable