Sistema de Gestão de Rede

Solicito apoio técnico para verificação de alarme no ACCID Dados (Circuito): "574033" com a falha de "Tipo de Falha: Link Down". O circuito começa em (Roteador A (Origem): RNDISPO-SPO02-01-100GE0/11/0. Status: UP, Fabricante: HUAWEI, Alarme Ativo: [TELCO][BBIP] INPUT BANDWITH UTILIZATION) indo ate (Roteador B (Destino): RNCOSPO0301-100GE8/0/3. Status: UP, Fabricante: HUAWEI, Alarme Ativo: [TELCO][BBIP] INPUT BANDWITH UTILIZATION). Onde a rota física passa por (ROTA FÍSICA (ELEMENTOS TX UTILIZADOS)): SPO-VMA01-THWW05 -> SPO-CVO01-THWW11 Informações Extras / Rascunho: [TELCO][BBIP] Input bandwith utilization RNDISPO-SPO02-01-100GE0/11/0 31/01/26 22:46:36 100GE0/11/0 CONEXAO AO CORE|RNCOSPO0301|HU8/0/3|ACCID 574033|NONE|ACT|NONE <RNDISPO-SPO02-01>display interface 100GE0/11/0 100GE0/11/0 current state : UP (ifindex: 36) Line protocol current state : UP Link quality grade : GOOD Description: CONEXAO AO CORE|RNCOSPO0301|HU8/0/3|ACCID 574033|NONE|ACT|NONE Route Port,The Maximum Transmit Unit is 9100 IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 2087-ec5b-0020 Factor/Module: QSFP28, Standard: 100GBASE-ER4, FecMode: Disable The Vendor PN is OM9558ES100 The Vendor Name is HISILICON Port BW: 100G, Transceiver max BW: 100G, Transceiver Mode: SingleMode Connector Type: LC, Transmission Distance: 40km WaveLength: 1295.56nm 1300.05nm 1304.58nm 1309.14nm Rx Warning range: [-20.915, -3.500]dBm, Tx Warning range: [-2.900, 2.899]dBm Rx0 Power: -10.86dBm, Tx0 Power: -0.38dBm Rx1 Power: -10.71dBm, Tx1 Power: -0.28dBm Rx2 Power: -10.32dBm, Tx2 Power: -0.08dBm Rx3 Power: -10.15dBm, Tx3 Power: 0.17dBm <RNCOSPO0301>display interface 100GE8/0/3 100GE8/0/3 current state : UP (ifindex: 234) Line protocol current state : UP Link quality grade : GOOD Description: CONEXAO AO DIST|RNDISPO-SPO02-01|100GE0/11/0|574033|DIS SPO02|ACT|NONE Route Port,The Maximum Transmit Unit is 9100 IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is ecc0-1b7a-42ad Factor/Module: QSFP28, Standard: 100GBASE-LR4, FecMode: Disable The Vendor PN is SQF1012L4LNH102B The Vendor Name is SumitomoElectric Port BW: 100G, Transceiver max BW: 100G, Transceiver Mode: SingleMode Connector Type: LC, Transmission Distance: 10km WaveLength: 1295.56nm 1300.05nm 1304.58nm 1309.14nm Rx Warning range: [-7.999, 4.500]dBm, Tx Warning range: [-2.500, 4.000]dBm Rx0 Power: 0.01dBm, Tx0 Power: 2.52dBm Rx1 Power: 0.32dBm, Tx1 Power: 2.46dBm Rx2 Power: -0.19dBm, Tx2 Power: 2.06dBm Rx3 Power: 0.07dBm, Tx3 Power: 1.75dBm